I was lucky enough to get an overlocker from my parents as a combined birthday and Christmas present last year. I’ve now sewn a few things on it, and I’m really starting to get more confident using it! It’s an Elna 664, which was recommended by my Mum’s local sewing machine dealer (Arcade Sewing Machines, in Huddersfied – I would absolutely recommend them if you are anywhere near, as what they don’t know about sewing machines isn’t worth knowing!)
Today I’ve got two projects to show you, both completed on my overlocker! (ALSO: Apologies about the bad photos – I didn’t have any time to take photos during daylight at the weekend, so you’ll have to make do with photos taken in bad artificial light!)
1. A quick fix…
Every so often, I see things in shops that have a massive ‘damaged’ label on. Usually it’s not something in my size, or where I like the item enough to buy and then fix, but I found this in the Monsoon sale for £15 – it’s a lovely viscose jersey and a size 12. After a quick look for the damage I realised that it was a really quick fix – a 4inch gap in the stitching in the side seam, a 5-minute fix with my overlocker!
I bought this in the Boxing Day Sales, before the New Year, and before I had firmly decided on my RTW-diet, so I’m not cheating, don’t worry!!!
2. My first Lady Skater!After a really fun day with my sewing friends Leire and Claire last Sunday, I got home feeling very inspired to sew something, so I reached for the Lady Skater that I cut out on our last sewing day in November. This is my first time working with a Kitschy Coo pattern, and I can definitely say it won’t be my last! This was such a quick make (despite massively messing up the neckline …more below…) – I think it took around 4 hours, mostly on Sunday night, and despite the hiccup, I’m really happy with the result!
Construction was fairly straightforward, and I followed the pattern to the letter except for 3 adjustments:
- Removed 1 inch from the length of the bodice (this is a fairly standard adjustment for me)
- Cut the sleeves shorter as I didn’t have enough fabric for long sleeves.
- Took an extra half inch off from the inner arm seam, as it felt too loose.
The only thing I found difficult about this was getting the neck band right. Originally I didn’t think I had enough fabric to do the neckband, so decided I would finish the neckline another way, and continued to sew the dress up as per the instructions. But, when I got to nearly being finished, I then realised I did have enough fabric to cut the neck band, so put it on the dress… I think I must have stretched it unevenly, as in one small area, the stitches didn’t go through all the layers, leaving a little hole.
When I tried to go over this bit again (on my overlocker, as I was being lazy and didn’t want to baste it first – serves me right), I accidentally cut an extra 5mm off… while this might not matter with another seam, it was really obvious on the neckline, and meant that the neck band was waaay thinner on one side of the neckline than the other. I realised the only way to resolve this was to trim the rest of it down too, so now the front neck band is half the width it is at the back- I didn’t want to re-do the whole thing, and decided as long as it looked fairly deliberate and even, it would be ok! Of course, I’m not 100% happy with that, but I don’t think it’s too bad – it’s certainly wearable!
Aside from basting on the clear elastic, and hemming, I did this all on my overlocker. The only other thing I would do on my standard machine next time is the neck band – I definitely plan to learn from this mistake! Next time I make this, I will also take off an extra half inch from the waistline as it’s still a little lower than I would like.
- Kitschy Coo Lady Skater pattern, size 5, mid length sleeve
- 1.5m Black floral print viscose jersey from Croft Mill (£8/m –I also seem to remember that postage was really expensive!
What’s on your sewing table at the moment?